Remove Knot Remove Stability Remove Wind Shear
article thumbnail

How to Read a Windsock

Pilot Institute

The wide end of a windsock points into the wind, while the narrow end indicates its direction. Standard FAA aviation windsocks are calibrated to fully extend at a wind speed of 15 knots. Regular inspection of windsocks makes sure you receive reliable wind information. Extended halfway: Winds are around 7-8 knots.

Knot 98
article thumbnail

Step-by-Step Guide: How to Land a Piper Seminole Safely

Pilot's Life Blog

Approach speeds typically range from 80 to 90 knots depending on weight and flap settings, while full flaps are often used to provide the necessary lift during landing. Review current weather conditions, including wind speed, direction, and visibility, as these can significantly impact the approach.

Descent 52
Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

article thumbnail

What Is a SPECI and When Is It Issued?

Pilot Institute

A sudden wind shift, a 10-knot or greater speed increase, a 45-degree or more direction change, or gusts exceeding limits may also cause a SPECI. Wind Information The next thing you will find is wind information. This includes the wind direction in degrees and the wind speed in knots.

article thumbnail

When Training Turns Too Realistic

Plane and Pilot

No flying in winds exceeding 10 knots, no chance of obscuring precipitation, no use of runways shorter than 5,000 feet, no risk of encountering darkness or lowering ceilings. Constant manipulation of attitude and power while chasing errant airspeed are signs that a CFI needs to step in to stabilize things.

Runway 52
article thumbnail

When Training Turns Too Realistic

Plane and Pilot

No flying in winds exceeding 10 knots, no chance of obscuring precipitation, no use of runways shorter than 5,000 feet, no risk of encountering darkness or lowering ceilings. Constant manipulation of attitude and power while chasing errant airspeed are signs that a CFI needs to step in to stabilize things.

Runway 52
article thumbnail

Aviation Weather 101: What Makes Microbursts So Dangerous?

Pilot Institute

The pilots fought to recover, but the wind shear was too strong. Key Takeaways Microbursts can cause severe wind shear and downdrafts. It is the most severe type of wind shear. Theyre a form of low-level wind shear, which is a rapid shift in wind speed or direction near the ground.

article thumbnail

How to Perform a Go-Around (The Right Way)

Pilot Institute

Top Reasons for Go-Arounds Unstabilized Approach An aircraft must have a stabilized approach before landing. An approach is stabilized when: The aircraft is on the correct flight path, i.e., on runway centerline and glideslope. Weather Go-arounds due to weather occur due to wind shear caused by gusting winds or microbursts.