Remove Horizontal Stabilizer Remove Knot Remove Rudder
article thumbnail

35 years ago: How a United Airlines crew landed an ‘unflyable’ DC-10

Aerotime

The primary flight controls on the DC-10 (ailerons, rudder, elevators, spoilers) were all operated by hydraulic pressure and the first officer was quick to realize that his controls were unresponsive to his inputs. On checking the hydraulic fluid pressure and quantity gauges, he noticed that they all read zero.

Runway 294
article thumbnail

Split-S Decision

Plane and Pilot

Alongside a nearby highway, some recognizable bits of airplane, the vertical stabilizer and rudder, a horizontal stabilizer and elevator, fell separately to Earth. But a review of the avionics data shows it was entered at the correct airspeed (placarded as between 104 and 165 knots), and the roll rate was constant.

Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

article thumbnail

Split-S Decision

Plane and Pilot

Alongside a nearby highway, some recognizable bits of airplane, the vertical stabilizer and rudder, a horizontal stabilizer and elevator, fell separately to Earth. But a review of the avionics data shows it was entered at the correct airspeed (placarded as between 104 and 165 knots), and the roll rate was constant.

article thumbnail

Avoiding the Stall

Plane and Pilot

However, if you take a close look at the inboard upper wing surface of the B-52, you will see a neat row of vortex generators that correspond to the width of the horizontal stabilizer. These were added to manage the low speed air flow over the wings, stabilizer and elevators.

article thumbnail

Nothing Small About It

Plane and Pilot

We routinely taxi at 1200 rpm due to the low spray…[we] can cruise at 10 knots” in displacement mode, something a Goose can’t do. Early on a speed restriction of 130 knots was applied as a flutter issue. This was resolved on the kit version and led to cruising at 50% power and 120 knots, which proved to be the Gweduck’s sweet spot.

article thumbnail

Return to Form

Plane and Pilot

The previous CTs had a stabilator for pitch, where the new F2 uses a more conventional elevator and fixed horizontal stabilizer. With the F2, the rudder and vertical stabilizer are changed, with the rudder becoming a much smaller surface than before. Well see about that. In this case, nothing.

Rudder 83