Remove Descent Remove Lift Remove Torque
article thumbnail

Unbolted in Fairfield (Update on the 2022 Bell 407 GXP Crash)

Fear of Landing

At approximately 30-40 feet agl, the spinning stopped and the helicopter appeared to stabilize for a brief moment before continuing a nose-low, forward descent into the grass north of Runway 28. Then he followed the installation procedure, including the mast nut torque application. As it descended it spun around 2-3 times.

Torque 98
article thumbnail

Overcoming the Five Most Common Landing Errors

Flight Training Central

It may be necessary to add a slight amount of power to keep the airspeed from decreasing excessively and to avoid losing lift too rapidly. This not only stops the descent, but actually starts the airplane climbing. This procedure should only be used when there is adequate airspeed.

Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

article thumbnail

Is Flying a Helicopter Harder Than Flying a Plane? A Comparative Analysis

Pilot's Life Blog

Aerodynamic Differences Fixed-Wing Aircraft (Airplanes) Airplanes , or fixed-wing aircraft, generate lift through their stationary wings as they move forward. This pressure difference produces lift, allowing the aircraft to ascend. Each rotor blade acts as an airfoil, and as it rotates, it moves air over its surface, generating lift.

Torque 52
article thumbnail

Everything You Need To Know About Ailerons

Pilot Institute

Key Takeaways Ailerons control the aircrafts roll by adjusting lift on each wing. The aircrafts wing is able to generate lift due to its shape. The more the wings shape is able to change the direction of the flow of air over the surface, the more lift it will produce. Why does this increase the lift? How Do Ailerons Work?

Aileron 90
article thumbnail

The Role of Newton’s Third Law in Aviation

Pilot Institute

Lift is the force that aircraft use to counter gravity. Newton’s Third Law is one of the key laws of physics that explains lift. Lets see what Newtons Third Law is, and why we need it to understand lift. This principle is fundamental in generating lift, thrust, and maneuverability, allowing aircraft to fly.

Lift 52
article thumbnail

Nothing Small About It

Plane and Pilot

Another advantage of the counter-rotating props is the elimination of torque roll. This is the tendency to dig in the left tip float during takeoff while countering engine torque. The airfoil is a Harry Riblett shape, giving modernized flow separation on the leading edge for a soft stall yet with good lift and drag performance.