Remove Crosswind Remove Runway Remove Wind Shear
article thumbnail

How to Read a Windsock

Pilot Institute

This cone-shaped fabric tube may seem simple, but it delivers vital information about wind conditions that every aviator must learn. The windsock is normally placed next to a runway or helipad so that you can easily see it when lined up for takeoff or coming in for a landing. Consider a windsock as nature’s wind compass.

Knot 98
article thumbnail

A Touristy Timeout for Safety

Plane and Pilot

Most seemed to be using more flaps than normal for takeoff, the idea being to get away from the ground as quickly as possible to minimize their time near the ground, where a wind shear could have serious consequences. When making a cross-wind takeoff, hold the nose gear on the runway longer and accelerate to a higher speed than normal.

Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

article thumbnail

Step-by-Step Guide: How to Land a Piper Seminole Safely

Pilot's Life Blog

Learning how to land a Piper Seminole means becoming comfortable with these avionics, which help guide the aircraft through the landing procedure, ensuring optimal approach speeds and alignment with the runway. Review current weather conditions, including wind speed, direction, and visibility, as these can significantly impact the approach.

Descent 52
article thumbnail

When Training Turns Too Realistic

Plane and Pilot

While instructors idly watch, airplanes go off the runway, landings become too harsh, structure gets overstressed, and tolerances are exceeded. No flying in winds exceeding 10 knots, no chance of obscuring precipitation, no use of runways shorter than 5,000 feet, no risk of encountering darkness or lowering ceilings.

Runway 52
article thumbnail

When Training Turns Too Realistic

Plane and Pilot

While instructors idly watch, airplanes go off the runway, landings become too harsh, structure gets overstressed, and tolerances are exceeded. No flying in winds exceeding 10 knots, no chance of obscuring precipitation, no use of runways shorter than 5,000 feet, no risk of encountering darkness or lowering ceilings.

Runway 52
article thumbnail

How to Perform a Go-Around (The Right Way)

Pilot Institute

These include a runway collision, porpoising, bouncing, or possible overrun. ATC can also ask for a go-around if the landing runway is unsafe or for spacing reasons. An approach is stabilized when: The aircraft is on the correct flight path, i.e., on runway centerline and glideslope. Airspeed is not less than 1.3Vso +10/-0.