Flight Training Central

JANUARY 27, 2025

From misjudging the flare to battling crosswinds, these mistakes can challenge pilots of all experience levels. This not only stops the descent, but actually starts the airplane climbing. No attempt should be made to force the airplane back onto the grounda GO-AROUND should be executed immediately.

Airplanes 89

Airplanes Runway Accelerated Stall Lift 89

Pilot Institute

FEBRUARY 20, 2025

The rotational force thats needed to move an object about an axis is called torque. The simplest formula for torque is: Torque = F x L L is the distance between the object and the axis of rotation, also called the moment arm. The resulting loss of lift leads to a rapid descent by the aircraft.

Aileron 90

Aileron Weight-Shift-Control Rudder Longitudinal Axis 90

Pilot Institute

APRIL 12, 2025

The complication with helicopters is that the main rotor is driven by an engine that applies a twisting force (torque) to spin it. This is called torque reaction, and if its left unchecked, the helicopter fuselage will spin in the opposite direction of the main rotor. These rotors create equal and opposite torques that cancel out.

Lift 52

Lift Thrust Torque Aileron 52

Plane and Pilot

OCTOBER 3, 2024

Combining the Gweduck’s advanced hull with its counter-rotating propellers means differential power allows crosswind water taxiing impossible in floatplanes along with higher hull-in-water taxiing speeds. “We Another advantage of the counter-rotating props is the elimination of torque roll. A not so obvious advantage is taxiing.

Airplanes 80

Airplanes Rudder Knot Aileron 80