Remove Airfoil Remove Hangar Remove Knot
article thumbnail

Passing the torch

Air Facts

Each day, 12 students spent two hours in a fabrication hangar where they cut/folded/riveted a sheet of aluminum into a wing component. irplane controls work per the Lever Principle, and a wing’s airfoil shape increases lift via the Bernouilli Principle and Coanda Effect. five hours at 150 knots vs. five weeks at 5 knots).

Lift 98
article thumbnail

Wingtip Vortices and Wake Turbulence

Pilot Institute

When air flows over the aircraft wing, the shape of the airfoil creates low pressure above the wing and relatively higher pressure below the wing. This lateral movement takes place at a speed of about two or three knots. That makes it harder for the aircraft to fit into hangars and airport gates. How Are Wingtip Vortices Formed?

Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

article thumbnail

Nothing Small About It

Plane and Pilot

We routinely taxi at 1200 rpm due to the low spray…[we] can cruise at 10 knots” in displacement mode, something a Goose can’t do. The airfoil is a Harry Riblett shape, giving modernized flow separation on the leading edge for a soft stall yet with good lift and drag performance. But it will go 140 knots at 28 gph total.)

article thumbnail

Return to Form

Plane and Pilot

Airtime inhabits a large hangar at the Tulsa Riverside Airport (KRVS) where newly imported CTs are prepped, and ongoing maintenance and upgrades are carried out for aircraft in the U.S. It was our completion center for our CF23 version of the aircraft, but it was a small hangar and warehouse. distributor for Flight Design aircraft.