Vintage Aviation News

APRIL 1, 2025

The delta wing’s large area (425 square feet), thin airfoil cross section, low weight, and structural strength made a great combination for a supersonic aircraft. It was controlled by a conventional rudder and full-span elevons that functioned as elevators and ailerons. The XF-92A was then used to test the delta-wing concept.

Airfoil 64

Airfoil Aileron Rudder Stability 64

Pilot Institute

MARCH 28, 2025

When air flows over the aircraft wing, the shape of the airfoil creates low pressure above the wing and relatively higher pressure below the wing. When the aircraft encounters a vortex and its strong enough to induce roll, the pilot counters it by using the ailerons against the roll and tries to fly out of the wake as soon as possible.

Turbulence 97

Turbulence Lift Drag Runway 97

Pilot's Life Blog

FEBRUARY 11, 2025

The wings are designed with an airfoil shape, curved on the top and flatter on the bottom, creating a pressure difference when air flows over them. Each rotor blade acts as an airfoil, and as it rotates, it moves air over its surface, generating lift. This pressure difference produces lift, allowing the aircraft to ascend.

Torque 52

Torque Lift Airplanes Stability 52

Pilot Institute

NOVEMBER 1, 2024

Remember that wings, propeller blades, and tail surfaces are airfoil-shaped. Ice build-up on the airframe changes the airflow pattern around these airfoils. Weather conditions that lead to mixed ice include areas where warm air layers are above freezing and cold air layers are below freezing.

Pitot Tube 52

Pitot Tube Drag Lift Airfoil 52