Remove AGL Remove Ground Effect Remove Knot
article thumbnail

How to Make a Perfect Soft Field Landing Every Time

Pilot Institute

If you’re not stabilized at 200 feet AGL, go around. On a normal landing, you’d pull the power over the threshold, begin your roundout, and flare around 10 feet AGL. Hold this extra power as you enter ground effect. Low-wing aircraft perform better in ground effect because of the wing’s proximity to the ground.

NOTAMs 52
article thumbnail

Invisible Trap Kills Glider Pilot – How To Avoid Microbursts

Chess In the Air

He only needed a glide ratio of 14:1 to reach the airfield to arrive at a typical pattern altitude of 1,000 ft AGL. Shmulik flew quite fast at ground speeds between 100 and 130 kt, carrying a lot of extra energy. At this point he still had an altitude of 8,275 ft MSL, i.e. 2,739 ft AGL. Shmulik was directly south of midfield.

Pilot 52
article thumbnail

How to Master Slow Flight (Step-By-Step)

Pilot Institute

Fly at least 1,500 above ground level (AGL) to allow room for recovery in case you stall the aircraft. For a greater margin of safety, select an altitude that leaves you 1,500 feet AGL after recovery from a stall. So, if you’re inexperienced or out of practice, consider starting at 3,000 feet AGL.

Lift 52