Remove AGL Remove Descent Remove Indicated Airspeed
article thumbnail

How to Fly Perfect Lazy Eights

Pilot Institute

It’s just S-turns with climbs and descents, right? Altitude and Airspeed You must select a minimum altitude for safety. For a dual flight, the minimum altitude is 1,500ft AGL (above ground level). If practicing these maneuvers solo, raise the minimum altitude to 2,000ft AGL.

Rudder 52
article thumbnail

Invisible Trap Kills Glider Pilot – How To Avoid Microbursts

Chess In the Air

He only needed a glide ratio of 14:1 to reach the airfield to arrive at a typical pattern altitude of 1,000 ft AGL. At this point he still had an altitude of 8,275 ft MSL, i.e. 2,739 ft AGL. At this point he was just NW of the runway at an altitude of 8000 ft MSL (2464 AGL). After all, a pattern entry altitude of approx.

Pilot 52
Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Trending Sources

article thumbnail

Unbolted in Fairfield (Update on the 2022 Bell 407 GXP Crash)

Fear of Landing

As the helicopter continued towards the airport, the airspeed began to decrease. The indicated airspeed had fallen below 65 knots and was still decreasing. As the airspeed decayed, the right yaw increased. The helicopter was at treetop height with an indicated airspeed of zero knots when the right yaw ceased.

Torque 76
article thumbnail

Danger lurks in circling approaches

Air Facts

Perhaps just prior to the start of descent could be the optimum time–certainly completed no later than commencement of approach. Recall that we must remain at or above MDA until we are in a normal position to perform a normal rate of descent to landing. Will the vertical speed necessary comply with required descent criteria?